Analisa Kadar Kesadahan pada Kualitas Air Demint Plant di Instalasi Pengolahan Air Sadah Pabrik Kelapa Sawit

Authors

  • Agesta Prajutama Jurusan Teknik Pertanian, Fakultas Teknologi Pertanian, INSTIPER Yogyakarta, Indonesia
  • Harsunu Purwoto Jurusan Teknik Pertanian, Fakultas Teknologi Pertanian, INSTIPER Yogyakarta, Indonesia
  • Hermantoro Hermantoro Jurusan Teknik Pertanian, Fakultas Teknologi Pertanian, INSTIPER Yogyakarta, Indonesia

DOI:

https://doi.org/10.55180/aei.v2i2.715

Keywords:

Water Instalation, Regeneration, Demint Plant, Effectiveness

Abstract

Demint plant is a water supply unit that functions to keep water away from high mineral content and maintain hardness stability. This installation is very influential on the quality of internal water for water treatment, especially in oil palm processing plants. In providing the supply of water needs in the factory, the company must have a demint plant unit if the silica content contained in the reservoir water is in high condition then use the installation. The physical properties of water have various criteria, one of which is minerals, oxygen and magnesium in the form of hardness. The nature of water hardness is divided into two types, namely permanent hardness and temporary hardness. Water that has high hardness is very detrimental. The objectives of this study are: (1) Analyze the results of the demineralization process in palm oil mill water treatment to remove Ca and Mg levels. (2) Calculate and measure Ca and Mg levels in trace water quality. (3) Analysis of demin plant quality performance in reducing hardness. From the analysis of hardness levels in the quality of the demint plant unit using the principles of quantitative methods, the following conclusions can be drawn: (1) The demineralization process to remove Ca and Mg or hardness is still not effective due to the factor of using expired quality resin so that ion exchange is not efficient. (2) Ca and Mg levels in trace water quality are not read or undetectable by the test equipment. (3) The performance of the demin plant to remove hardness is not efficient due to the unstable silica content and resulting high minerals so that the performance of the demin plant is required to be maximized. (4) In the demint plant test, the output results of cation pH 5, M.Alk 19.2 ppm, Hardness trace, silica 4.6 ppm, TDS 36 ppm, Iron 0.18 ppm and when compared to the standard, namely pH 7-9, M.Alk 35 ppm, Hardness trace, silica 5 ppm, TDS <100 ppm, Iron 0.2 ppm there are several quality parameters that still do not meet the planned standards so that evaluation needs to be done in order to achieve quality standard parameters.

References

, 2 1,2. (2023). 2(9), 3791–3802.

Aktivasi, A., Aan, N., Ga, R., Abessy, S. I. W., Metoda, D., Aktiv, A., & Neutron, A. S. I. (2000). SIW ABESSY REACTOR BY NEUTRON ACTIVATION ANALYSIS . Determination of content of neutron. 115–121.

Cundari, L., Supriyatna, E., & Samhudi, H. (2016). Pengaruh Waktu Kontak Dan Kecepatan Pengadukan Terhadap Recovery Aluminium Pada Asidifikasi Sludge Keluaran Water Treatment. Jurnal Teknik Kimia, 22(2), 19–27.

Gede, I. D., Putrawan, A., & Ihsan, A. (2010). Pembuatan karbohidrazida. 1–7.

Handoyo, M. A. (2019). BAB II Tinjauan Pustaka BAB II TINJAUAN PUSTAKA 2.1. 1–64. Gastronomía Ecuatoriana y Turismo Local., 1(69), 5–24.

Hendrawati, H., & Maryam, S. (2008). Analisis Kation Dan Anion Air Tanah Di Daerah Sukabumi Jawa Barat. Jurnal Kimia VALENSI, 1(2), 87–91. https://doi.org/10.15408/jkv.v1i2.255

Heranurweni 2019. (n.d.). ANALISIS AIR BOILER DENGAN PARAMETER pH, ALKALINITAS, TDS, HARDNESS DAN SILIKA DI PT. BEURATA SUBUR PERSADA.

Kosim, M. E., Prambudi, D., & Siskayanti, R. (2021). Analisis Efisiensi Penukar Ion Sistem Demineralisasi Pada Pengolahan Air di Proses Produksi Electroplating. Prosiding Semnastek, November, 1–7. https://jurnal.umj.ac.id/index.php/semnastek/article/view/11456%0Ahttps://jurnal.umj.ac.id/index.php/semnastek/article/download/11456/6507

Maulizar, A., Masykur, M., & Supardi, J. (2022). ANALISIS pH, TDS, TOTAL HARDNESS, ALKALINITY, DAN SILICA PADA BOILER FEET WATER DI PT. SOCFINDO PERKEBUNAN KELAPA SAWIT DI SEUNAGAN. Jurnal Mekanova: Mekanikal, Inovasi Dan Teknologi, 8(1), 129. https://doi.org/10.35308/jmkn.v8i1.5630

Merisha, Apriyani, EkaMayasari, R., & Hastarina. (2019). Analisis turbidity terhadap dosis koagulan dengan metode regresi linear (studi kasus di PDAM Tirta Musi Palembang ). Jurnal Integrasi Sistem Industri, 6(2), 117–125.

Munawaroh, N., Syamsyiatun, S., & Fikri, A. A. (2019). Sistem Pengolahan Air dan Pengendalian Limbah di PLTU Tanjung Jati-B Desa Tubanan Kembang Jepara. Jurnal Bakti Saintek: Jurnal Pengabdian Masyarakat Bidang Sains Dan Teknologi, 3(2), 73. https://doi.org/10.14421/jbs.1406

Priambodo, D., Alimah, S., & Dewita, E. (2009). Studi Banding Sistem Demineralisasi Air. 1000, 83–91.

Rahardja, I. B. (2019). Perhitungan Jumlah Bahan Kimia pada External Water Treatment (Studi Kasus di PMKS XYZ, Kalimantan Tengah). Jurnal Citra Widya Edukasi, 5(1), 77–82.

Sumarno, D., Muryanto, T., & Sumindar, S. (2017). Hubungan Total Padatan Terlarut Dan Konduktivitas Perairan Di Danau Limboto, Provinsi Gorontalo. BULETIN TEKNIK LITKAYASA Sumber Daya Dan Penangkapan, 15(2), 109. https://doi.org/10.15578/btl.15.2.2017.109-113

Water, B. F. (2021). Evaluasi Performance Regenerasi Mixed Bed Polisher Pada Unit Demineralisasi. Mecha Jurnal Teknik Mesin, 3(2), 38–45. https://doi.org/10.35439/mecha.v3i2.20

Widodo, I. (2012). Perbedaan pH dan Nilai DMF-T pada Sumber Air Tanah dan Sumur di Kecamatan Arjasa Kabupaten Jember. Fakultas Kedokteran Gigi Universitas Jember, S 1, 1–38.

Downloads

Published

2026-11-17

How to Cite

Prajutama, A., Purwoto , H., & Hermantoro, H. (2026). Analisa Kadar Kesadahan pada Kualitas Air Demint Plant di Instalasi Pengolahan Air Sadah Pabrik Kelapa Sawit. AGRICULTURAL ENGINEERING INNOVATION JOURNAL, 2(2), 86–104. https://doi.org/10.55180/aei.v2i2.715

Issue

Section

Articles

Citation Check